Heidelberg T Platen Press
with Starfoil foil conversion unit
Description
This press is completely revised and in new-state condition complete with Starfoil foil conversion unit.
The foil conversion unit has a computer driven steppen motor drive.
The foil pull has an accuracy of 1 mm. The temperature is controlled electronically.
Will handle paper up to 1 mm thick.
The control is via a small control box which sits on a table directly in front of the operator, incorporating stepper motor and temperature control. A heater plate is supplied with six cartridge heaters facilitating speedy responce.
Hologram registration is available as an option on this machine.
The foil conversion unit has a computer driven steppen motor drive.
The foil pull has an accuracy of 1 mm. The temperature is controlled electronically.
Will handle paper up to 1 mm thick.
The control is via a small control box which sits on a table directly in front of the operator, incorporating stepper motor and temperature control. A heater plate is supplied with six cartridge heaters facilitating speedy responce.
Hologram registration is available as an option on this machine.
Specifications
| SPECIFICATIONS | GT Platen Press with Starfoil conversion unit |
| Print specification | |
| Maximum mechanical speed | 4000 IPH |
| Maximum sheet size | 340 x 460 mm |
| Minimum sheet size | 85 x 120 mm |
| Foiling area | 320 x 448 mm |
| Maximum foil length | 610 mtrs |
| Number of foil units | 1 standard / 2nd optional |
| Number of lengths per program | up to 3 |
| Number of pullls per length | 3 |
| Heat zones | one |
| Sensors per bed | one |
| Conversion power | 220/240 Volts 16Amp |
Did you know that Starfoil is a supplier of make-ready materials?
• Toggle hooks, keys en bits
• Pertinax
• Presspan
• Epoxy glass board
• Yellow cover board
• Rubber Printbase
• SuperPress blanket
• Diafoil
• Pertinax
• Presspan
• Epoxy glass board
• Yellow cover board
• Rubber Printbase
• SuperPress blanket
• Diafoil
